\n
\n

 

 

2-000830
Quantity: 2
Comfort Shipping Bracket with Fastening Plate

\n
\n
\n

Shipping Bracket with Mounting Plate, used to transport Siegmund welding tables and other heavy components safely and easily. It is fastened quickly and simply, using at least 2 clamping bolts. Depending on the specific application, the load-bearing capacity can be substantially reduced. During transport, the table must not be raised more than 100 mm, and no one is allowed below the table In addition, the Shipping Bracket can be used as a simple attachment for shipping straps.

Please consider following safety instructions:
1. Ring nuts should be completely bolted.
2. Ring nuts should bear flat and completely on support surface.
3. Length of mating thread has to be sufficient.
4. Lateral pull should be avoided.

- Item No. 2-000830.N
- Length: 150mm (5.90'')
- Width: 150mm (5.90'')
- Height: 25mm (0.98'')
- Weight: 10.36 Ibs.

\n
\"\"
\n
\n

 

 

2-002822
Quantity: 4
28 -> 22 Short Combination Fast Clamping Bolt (Burnished)

\n
\n
\n

The Combination Clamping Bolt was developed specifically to bolt components of bigger systems to smaller systems. The ball size and clamping force correspond with fast clamping bolts. The fourth ball located in the center reduces internal friction and increases the force of the handwheel. The new design of the Fast Clamping Bolt dispenses with the O-rings, however it is still easy to clean.


- Item No. 2-002822
- Length: 88mm (3.46'')
- Diameter Ø: 40mm (1.57'')
- Shearing Force: 130kN
- Tightening Torque Steel: 15Nm
- Tensile Force: 14kN
- Weight: 1 Ibs.

\n
\"\"
\n
\n

 

 

2-000810
Quantity: 1
Ground Connection Comfort

\n
\n
\n

Ground Connection, guarantees 100% contact to the welding table, therefore no overheating is possible. Simple installation by fastening it in a system borehole. This Ground Connection is for structural welding only. Not recommended for thin materials (i.e. Sheet Metal).
This may not work for all applications.

- Load up to 500 ampere
- Cable cross section: 70-95 mm²
- Weigh: 1.45 Ibs.

\n
","image":["/images/weldingtablesandfixturesgear.shop/images/product/2-22002starterkit-the-metric-system-22-dual-lifting-bracket-starter-kit-for-2400-x-1200mm-welding-tables-1.jpg"],"sku":"2-22002starterkit-the-metric-system-22-dual-lifting-bracket-starter-kit-for-2400-x-1200mm-welding-tables","brand":{"@type":"Brand","name":"Siegmund Welding Tables"},"offers":{"@type":"AggregateOffer","lowPrice":259.7,"highPrice":259.7,"priceCurrency":"USD","availability":"https://schema.org/InStock","url":"https://weldingtablesandfixturesgear.shop/products/2-22002starterkit-the-metric-system-22-dual-lifting-bracket-starter-kit-for-2400-x-1200mm-welding-tables","offerCount":1}}
HomeStore

2-22002STARTERKIT: The Metric System 22 Dual Lifting Bracket Starter Kit for 2,400 x 1,200mm Welding Tables

Product image 1

2-22002STARTERKIT: The Metric System 22 Dual Lifting Bracket Starter Kit for 2,400 x 1,200mm Welding Tables

The Metric System 22 Dual Bracket
Starter Kit for the
2,400 x 1,200mm Welding Tables
(7 Pieces)

Item no.: 2-22002STARTERKIT

The Metric System 22 Dual Bracket
Starter Kit for the
2,400 x 1,200mm Welding Tables
(7 Pieces)

Item no.: 2-22002STARTERKIT

 

 

 

2-000830
Quantity: 2
Comfort Shipping Bracket with Fastening Plate

Shipping Bracket with Mounting Plate, used to transport Siegmund welding tables and other heavy components safely and easily. It is fastened quickly and simply, using at least 2 clamping bolts. Depending on the specific application, the load-bearing capacity can be substantially reduced. During transport, the table must not be raised more than 100 mm, and no one is allowed below the table In addition, the Shipping Bracket can be used as a simple attachment for shipping straps.

Please consider following safety instructions:
1. Ring nuts should be completely bolted.
2. Ring nuts should bear flat and completely on support surface.
3. Length of mating thread has to be sufficient.
4. Lateral pull should be avoided.

- Item No. 2-000830.N
- Length: 150mm (5.90'')
- Width: 150mm (5.90'')
- Height: 25mm (0.98'')
- Weight: 10.36 Ibs.

 

 

2-002822
Quantity: 4
28 -> 22 Short Combination Fast Clamping Bolt (Burnished)

The Combination Clamping Bolt was developed specifically to bolt components of bigger systems to smaller systems. The ball size and clamping force correspond with fast clamping bolts. The fourth ball located in the center reduces internal friction and increases the force of the handwheel. The new design of the Fast Clamping Bolt dispenses with the O-rings, however it is still easy to clean.


- Item No. 2-002822
- Length: 88mm (3.46'')
- Diameter Ø: 40mm (1.57'')
- Shearing Force: 130kN
- Tightening Torque Steel: 15Nm
- Tensile Force: 14kN
- Weight: 1 Ibs.

 

 

2-000810
Quantity: 1
Ground Connection Comfort

Ground Connection, guarantees 100% contact to the welding table, therefore no overheating is possible. Simple installation by fastening it in a system borehole. This Ground Connection is for structural welding only. Not recommended for thin materials (i.e. Sheet Metal).
This may not work for all applications.

- Load up to 500 ampere
- Cable cross section: 70-95 mm²
- Weigh: 1.45 Ibs.

$259.70

Original: $742.00

-65%
2-22002STARTERKIT: The Metric System 22 Dual Lifting Bracket Starter Kit for 2,400 x 1,200mm Welding Tables—

$742.00

$259.70

Product Information

Shipping & Returns

Description

The Metric System 22 Dual Bracket
Starter Kit for the
2,400 x 1,200mm Welding Tables
(7 Pieces)

Item no.: 2-22002STARTERKIT

The Metric System 22 Dual Bracket
Starter Kit for the
2,400 x 1,200mm Welding Tables
(7 Pieces)

Item no.: 2-22002STARTERKIT

 

 

 

2-000830
Quantity: 2
Comfort Shipping Bracket with Fastening Plate

Shipping Bracket with Mounting Plate, used to transport Siegmund welding tables and other heavy components safely and easily. It is fastened quickly and simply, using at least 2 clamping bolts. Depending on the specific application, the load-bearing capacity can be substantially reduced. During transport, the table must not be raised more than 100 mm, and no one is allowed below the table In addition, the Shipping Bracket can be used as a simple attachment for shipping straps.

Please consider following safety instructions:
1. Ring nuts should be completely bolted.
2. Ring nuts should bear flat and completely on support surface.
3. Length of mating thread has to be sufficient.
4. Lateral pull should be avoided.

- Item No. 2-000830.N
- Length: 150mm (5.90'')
- Width: 150mm (5.90'')
- Height: 25mm (0.98'')
- Weight: 10.36 Ibs.

 

 

2-002822
Quantity: 4
28 -> 22 Short Combination Fast Clamping Bolt (Burnished)

The Combination Clamping Bolt was developed specifically to bolt components of bigger systems to smaller systems. The ball size and clamping force correspond with fast clamping bolts. The fourth ball located in the center reduces internal friction and increases the force of the handwheel. The new design of the Fast Clamping Bolt dispenses with the O-rings, however it is still easy to clean.


- Item No. 2-002822
- Length: 88mm (3.46'')
- Diameter Ø: 40mm (1.57'')
- Shearing Force: 130kN
- Tightening Torque Steel: 15Nm
- Tensile Force: 14kN
- Weight: 1 Ibs.

 

 

2-000810
Quantity: 1
Ground Connection Comfort

Ground Connection, guarantees 100% contact to the welding table, therefore no overheating is possible. Simple installation by fastening it in a system borehole. This Ground Connection is for structural welding only. Not recommended for thin materials (i.e. Sheet Metal).
This may not work for all applications.

- Load up to 500 ampere
- Cable cross section: 70-95 mm²
- Weigh: 1.45 Ibs.

2-22002STARTERKIT: The Metric System 22 Dual Lifting Bracket Starter Kit for 2,400 x 1,200mm Welding Tables | Siegmund Welding Tables